:rofl:
Announcement
Collapse
No announcement yet.
Re-Bulid Bimmer Autoworks E36 M3 Drag Race
Collapse
X
-
Originally posted by Mac Daddy View PostUpdate:
Finally the front towers reinforcement places order just arrived ..!!:D
this make shocks tower more stronger, now waitting for welding ;)
sigpic5/94' E36 318iS 5-spd
Bilstein PSS|SWIFT 070's|26/18mm sways|FCABS|Sphericals|Prospec/ACS bars|M plates+shims
LTW FW+228mm SACHS|UUC EVOII|ATS Metal LSD|Solid mounts throughout
P&P TB|3" box|COP|FDM|De'heater plated
Recaro|OMP|Borbet/MK Motorsports|M DSII's|Custom lip
Comment
-
UPDATES
BEEN SLEEEEPING FOR SUCH LONG TIME SINCE LAST UPDATE ,
Roll Cage job completed Finally
( Ali ( Welder) been alot busy in the past two month)
Updats on Stages:-
- Roll cage job card completed
- Reinforment of tower bar + transmission Area ( final Touches of welding)
- Painting underneath area (rust proov+ WHITE paint)
- Installation of front + Rear suspension coilover + subframe and bushing
- Installation of Fuel cell ( lines) + Break lines
- Sending the car to the paint shop for ( Wideing Rear Finnders + paint job)
These steps above will hopfully finish within a month
Enjoy latest pics of our CAR
Comment
-
The project has been parked in our garage for a while for some research and development in order continue with same target plan
On October we’ve started to work again and focusing in major jobs which I have listed in previous thread, the below is the summery which I have completed.
STAGE1
-Stripping the car Done
-Shaving body, welding and chassis reinforcement. Done
-Building Roll cage with 1-5/8”x.083 Chromoly (4130) 8 point roll cage Done
- Paint Chassis, engine bay and interior with white colour (changed to gray) Done
STAGE2
-Upgrading Subframe and Crossmember with Solid Race Bushing Done
-Upgrading Suspension with coilover for Drag Race application (D2 coilover) Done
-Upgrading the Brake system (waiting to order slotted/dried brake rotors)
- Braded fuel lines and racing fuel cell (my next plan)
Still have a lots work to be done and I summarized as follows;
-Changed all glass to Lexian Plastic and build door frame for extra support
-Widening the rear fender so it can fit 9 to 10.5 tyres
-Build new FG trunk with bigger aerodynamic wing
-Take the car to body shop to delete some of unnecessary body holes and paint in with new colour (not decided yet ).. I might stay with the existing one
I hope the body will be ready at least on the first quarter so I can focus on my engine build and inshallah start doing last STAGE 3,
for time begins enjoy watching project progress
Local made subframe solid aluminum boushing for better stifness ..
Finally my special order from D2 has arrived .!!!!
you can see why they special ..
Rear camber arms for more positive adjust ....
36 way of adjusments
Looks grate with good clerance !!
Front one is fitted
Brake line installed with braded line for calipers
Coming soon ...........Last edited by Mac Daddy; 10-02-2011, 09:44 AM.
Comment
Comment