Re-Bulid Bimmer Autoworks E36 M3 Drag Race

[MR.E36I]

Hello Every one,

It was very difficult decision to Turn this convertibel M3 into a Track Car
since NON has Done it before but our Team Took the Risk and Started it to have a uniqe look and powerful .
We are in love with E36 cabrio style

This car was involved in Drag Racing Last Year season in (BIC) Bahrain International circuit (Drag Race Track) , No major work is Done to before becouse the time was very short

Bimmer Autoworks Team decided to go over this project again and correct it Totaly :redflag:

Our Category is STREET 4/6 cylinder RWD Class Stock firewall and No power Adder like SC,Turbo,NOS
limited weight Reduction to CF or FG Hood and one Seat only -
full interior Trims , lightweight Wheels, Modified suspension,open Exhaust are allowed ..etc

Current Modifications:
S52B32 US Engine
Sunbelt Cams 280/272 duration
Frerra Dual Valve Spring
Ported polished head
S50B32 Euro headers with AA Exhaust system
Modified subframe and UUC Trans Mounting
Racing Dynamic Stabilizers
Stoke suspension
UUC aluminium flywheel with M5 clutch
3.91 LSD Diff
AA Tune

Best ET of 12,7@170 KM in 1/4 mile and 3rd best E36 N/A Record @ www.bimmerfourms.com



Bimmer Autoworks Team decided to go over the project again and correct it totally
Merging the FWD/RWD N/A category together that’s a big challenge to us our goal is to hit 10sec with fully modified N/A S54 Engine.

Stage 1

-Car totally stripped out
-Trimming the harness and get out of unnecessary wires
-Shaving body, welding, reinforcement and Painting .
-Building Roll cage with 1-5/8”x.083 Chromoly (4130) Tubing

Stage 2-Upgrading Subframe and Crossmember with Solid Race Bushing
-Upgrading suspension with coilover for Drag Race application
-Upgrading the Brake system
- Braded fuel lines and racing fuel cell

Stage 3-Upgrading the interior and Dash panel / gauges display
- Modifying the S54 Engine
-Upgrading Drivetrain and Multi-Puck Ceramic Clutch system
-Standalone Engine Management (bye bye Stoke ECU )

Enjoy my Updates

BEFORE...

See the pictures at Bimmers Autowork Workshop

NOW...

Stripped out..

REAR AXLE OUT








Wiring is Killing :scifigun:


Lots of works To be Done :eyes2:

Engine Removing

[

MORE TO COME STAY TUNED

[Mac Daddy]

Grate job Bother.!!

now we need to take off the engine and trans and then we have to build the body stand like this .

[mahmoud_bedewi]

looks good guys
i have question about this body stand, do u have it or u will make one?
also how do u attach the car to the stand, is it like a huge vise?

[MR.E36I]

WELCOME TO CHASISS STAND

LETS DO SOME ROTATES

NOW 360

[

[ahmad.alkhalil]

quite a bit of differnce between the before and current pics ;) :rofl:

Good luck with the rebuild... looking forward to the end result that's for sure

[Ayham]

Nothing is like a good build ;)

Waiting for updates...Q: how much softer are your rear springs now?

[MR.E36I]

Hello Again ,

BODY SHAVING IS STARTED

Using Hard Brush with Drill Shaving is Started
3 layers to be remove (oreginal factory paint + unti Rust gule + final undersela coat)

[CENTER]



First Area is DONE

[Mac Daddy]

update:

Some parts has been just arrived from US pics will be post it soon ..:hay:

[stoned-head]

good job guys :bmwbest:
always waiting for more pics :D

[springz]

[Mac Daddy]

Mr.E36I

Post the new pics ppl are watting !!!

:thanks2:

[MR.E36I]

Mr.E36I

Post the new pics ppl are watting !!!

:thanks2:

Soon will have some Big updates


Mac Daddy + (Gardenoo a GM Truck Fans tall bold guy :D)
is working on Chasis Stand it will be ready so soon

-Some of Enigne part's orderd from VAC waiting for delivery :yuhoo:

-CP pistons,Arrow Rods,Main and Road performance Bearings
ARP Head Studs,ARP Main Studs

-Engine Block will be sent to the workshop for some oversize job :woot:

-Now am doing some re-search to have a ready made 6 point roll cage to be shipped to us for installation, we can do it here in Bahrain but the material will cost much , we are going for chrome moly Tubes this will save some weight in my car

ill be saving the half price by doing so, am just waiting for a replay from some shops over UK,US and AU . ill be having full approved FIA Roll Cage

Stay Tuned some more to come so sooooon

[Mac Daddy]

Soon will have some Big updates


Mac Daddy + (Gardenoo a GM Truck Fans tall bold guy :D)
is working on Chasis Stand it will be ready so soon

-Some of Enigne part's orderd from VAC waiting for delivery :yuhoo:

-CP pistons,Arrow Rods,Main and Road performance Bearings
ARP Head Studs,ARP Main Studs

-Engine Block will be sent to the workshop for some oversize job :woot:

-Now am doing some re-search to have a ready made 6 point roll cage to be shipped to us for installation, we can do it here in Bahrain but the material will cost much , we are going for chrome moly Tubes this will save some weight in my car

ill be saving the half price by doing so, am just waiting for a replay from some shops over UK,US and AU . ill be having full approved FIA Roll Cage

Stay Tuned some more to come so sooooon

We have to make sure that rollcage is BDRC approved .

[MR.E36I]

UPDATES:-

-VAC First order is Recived

- Finally i got a replay from BD Racing http://shop.brokedickracing.com/
ill be having my 10 points TRRU DASH 1-5/8”x.083 Chromoly (4130) Tubing
it will be like this

but with a few modification to fit my VERT (EASY)


More pics coming soon

[Mac Daddy]

UPDATES:-

-VAC First order is Recived

- Finally i got a replay from BD Racing http://shop.brokedickracing.com/
ill be having my 10 points TRRU DASH 1-5/8”x.083 Chromoly (4130) Tubing
it will be like this

but with a few modification to fit my VERT (EASY)


More pics coming soon

Thanks for BD Racing .!!

Now we have to wait until arrive them then we have to manag it how to be fit it in a E36 vert body.:1stcup: