Guys!
How do I know if my break discs are worn out or not.
:thanks2:
How do I know if my break discs are worn out or not.
:thanks2:
-
You should see the thickness of the discs, the new ones are always thick, but the ones worn out will look thin..
-
Thanks Ali!
But I can't tell anything by just looking at the discs.Comment
-
u need to touch it by ur finger (from disc center upward) if u feel that area level till disc edge lower than the edge level that mean ur disc is worn out (the difference should be big. also u can check it through the i-drive.
E60 M5: LCI OEM Tail Light, CF Front/Side Grill, Bright White Angel eyes"
E46-Sold: OEM MtechII, Eisenmann exhaust (2x83mm), Bilstein sport shocks, H&R sprot springs, 18” OEM rims (F:225, R:255), M3 auto folding/heated mirrors, clear (LEDs tail lights/corners/sides), Orion V2 angel eyes, Xenoflo HID bulb (6000K) low beam, CF (interior/knob/steering wheel trim/doors handles/grille), Alcantara (gear boot/hand brake)Comment
-
The edges are a little thicker than the rest of the disc.Originally posted by eoudeh View Post
The iDrive says break service in 2000 kms. But I am not sure if its the pads or the discs. Or both.Comment
-
i think both, i can tell from what u said the discs are ok but u need to be sure about the thickness....in my case when the i-drive said its due, both pads & discs changed. it has been done at DAS :)
E60 M5: LCI OEM Tail Light, CF Front/Side Grill, Bright White Angel eyes"
E46-Sold: OEM MtechII, Eisenmann exhaust (2x83mm), Bilstein sport shocks, H&R sprot springs, 18” OEM rims (F:225, R:255), M3 auto folding/heated mirrors, clear (LEDs tail lights/corners/sides), Orion V2 angel eyes, Xenoflo HID bulb (6000K) low beam, CF (interior/knob/steering wheel trim/doors handles/grille), Alcantara (gear boot/hand brake)Comment
-
-
Hassan Im sure your discs are okay. Your mileage is too low for you to change the discs. And I think if your discs are worn out , your steering wheel vibrates when ur breaking, again im not sure.07 E64 650i Silver
sigpicComment
-
That makes sense Radu. I do have vibration while breaking. Just not sure if its the pads or the discs.Comment
-
Mr Hasan! You just left the X centre 2 hours ago?Originally posted by Hasan Shaikh View Post
Was you not paying any attention when I was explaining to you regarding:hmm::hmm::hmm::hmm::hmm: your Brakes! lolComment
-
:lol:Originally posted by shak "X" View Post
I was paying attention. I just need some more opinions.Comment
-
hasanic mood hits again....:rofl:
E60 M5: LCI OEM Tail Light, CF Front/Side Grill, Bright White Angel eyes"
E46-Sold: OEM MtechII, Eisenmann exhaust (2x83mm), Bilstein sport shocks, H&R sprot springs, 18” OEM rims (F:225, R:255), M3 auto folding/heated mirrors, clear (LEDs tail lights/corners/sides), Orion V2 angel eyes, Xenoflo HID bulb (6000K) low beam, CF (interior/knob/steering wheel trim/doors handles/grille), Alcantara (gear boot/hand brake)Comment
-
Come on over, I'll explain to you how you can determine a proper thickness for the discs.Comment
-
Ok ! so lets have the update from your other opinions and we shall see how they differ!Originally posted by Hasan Shaikh View Post
Comment
-
:lol:Originally posted by shak "X" View PostOk ! so lets have the update from your other opinions and we shall see how they differ!
This is not a competition Shak!Comment
Comment