Announcement

Collapse
No announcement yet.

Instructions to access the hidden OBC functions:

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • deepocean2009
    replied
    welcome all :)

    Leave a comment:


  • RAFiK
    replied
    Thread merged with this thread .. :)

    Leave a comment:


  • Bisho
    replied
    Thank you very much Rani.. it's precious..

    Leave a comment:


  • deepocean2009
    replied
    BMW On Board Computer (OBC) secrets!

    hey all

    i already tried it :D its amazing

    http://www.bmwe36blog.com/2007/03/31...r-obd-secrets/
    Last edited by deepocean2009; 13-05-2009, 11:15 PM.

    Leave a comment:


  • ahmad.alkhalil
    replied
    :rofl:

    Leave a comment:


  • Shak
    replied
    In the UK Fixing the dam things!

    Leave a comment:


  • Haissam
    replied
    shak where were you when i had 2 BMWs!?!

    Leave a comment:


  • Shak
    started a topic Instructions to access the hidden OBC functions:

    Instructions to access the hidden OBC functions:

    1. Hold Trip Reset while turning ignition key to ON position.
    2. OBC should show “Test”.
    3. Press Trip Reset repeatedly to select function 19.0 that unlocks all the features.
    3. Wait for display to show “Off”.
    4. Press Trip Reset for 1/4 second and release it.
    5. With no delay press Trip Reset several times to select one of the following functions:

    1 Car Engine and cluster data
    1.0 46nnn Chassis nr/VIN serial number (last 5 digits)
    1.1 4nnn K-number
    1.2 690236 Cluster Part #
    1.3 045210 Coding (04)/diagnosis (52)/bus index (10)
    1.4 1200 Week (12)/year of manufacture (2000)
    1.5 09_160 Hardware (09) and software # (16.0) of cluster
    1.6 Not used
    1.7 04__44 CAN-version (04) KI-revision index (44)
    2 (test) Cluster System Test - Activates the gauge drivers,
    indicators and LEDs to confirm function
    3 SI Data
    3.0 1098 Used fuel in liters since last SI (Service Inspection)
    3.1 0231 Periodic inspection days; elapsed days (since last SI)
    4 Momentary Consumption
    4.0 0145+ Instant fuel consumption - 0145=14.5 liters/100km
    4.1 0018 Instant fuel consumption - 0018=1.8 l/Hour
    5 Distance Gone Consumption
    5.0 082 Average mileage; 082=8.2 liters/100km
    5.1 0536 Calc. km to refuel (momentary distance to go)
    6 Fuel Level sensor inputs in liters
    6.0 109330+ Fuel level averaged; Left half sensor input=10.9 liters; Right sensor input=33.0 liters
    6.1 0439+ Total tank level averaged; vlgs 6.0: 10.9+33.0=43.9 liters
    6.2 0442+ Indicated value (44.2) and tank phase
    7 Temperature and Speed
    7.0 021+ Coolant/Engine temperature (2.1C)
    7.1 130 Ambient/Outside temperature - chg met 5 pts. 125/130/135
    7.2 + Engine speed / Current RPMs 1/min
    7.3 + Vehicle speed / Current Speed in km/hour
    8 Input value in HEX form
    8.0 1d0+ System voltage ADC-Value Hex code
    8.1 26C33C+ ADC Values HG left/HG right
    8.2 0000 ADC Value brake degradation sensor (000=o.k.)
    8.3 18C ADC Value outside temperature
    9 Battery
    9.0 140 Battery Voltage - 140 = UB 14.0v
    9.1 242013+?
    9.2 074_78+?
    9.3 0011+?
    10 Not used
    11 Not used
    12 Not used
    13 GonG Gong Test
    14 Not used
    15 Status cluster I/O-ports (bit codes) 0=low; 1=high
    1st-belt contact, seat belt fastened=0; 2) ignition lock contact, key inserted=0; 3) door contact, door open=0; 4) clock button pressed=0; 5) SI reset=0, for reset=0; 6) EGS transmission failure=0
    Status Digital Outputs (bits) 0=inactive, 1=active
    1) Gong output; 2) Brake warning lamp; 3) Low fuel warning lamp; 4) EGA lamp; 5) seat belt lamp; 6) manipulation dot
    16 Not used
    17 Not used
    18 Not used
    19 Lock Status; unlocks functions in range 3-18
    19.0 L-On/L-Off Unlock: press button when “L-Off”
    20 Not used
    21 Software Reset; reset OBC settings
    00 End of test

    :bmwbest:
Working...
X